Drier

Nara's liquid line and suction line filter-driers are often referred to as System Protectors because they remove harmful elements from the circulating refrigerant before serious damage results. Keeping the system clean and free of foreign contaminants that can restrict the operation of valves, block capillary tubes or damage compressors is the best way to assure trouble-free operation. These contaminants can be solids, such as metal filings, flux, dust and dirt. Other equally menacing contaminants are solubles, such as acid, water, resins and wax. The bead style filter-drier uses a less complicated manufacturing process, so there is less change of error. The active drying material is in the form of beads or pellets. No bonding material is used to hold the beads together, but rather compacting is normally performed through some type of mechanical pressure. On the upstream side of the compacted beads is a filter network which cushions flow and traps the solid contaminants. Nara filter-driers protect the refrigerant system from liquid and solid contaminants.

Features, Advantages & Benefits

• Filtration first for more effective use of surface area of desiccant.
  
• Soluble contaminant capacities for water, acid. Cushioned flow for non-turbulent performance.
  
• Process controlled fiberglass filter network for premium filtering.
  
• Corrosion resistant epoxy power paint finish.
  
• Rugged steel shells for shock resistance. Low pressure drop-full flow fitting.
  
• Furnished with seals to prevent moisture penetration.
  
• Maximum design pressure is 500psiG.
  
• Compatible with CFC, HCFC and HFC refrigerants.
  
• May be mounted in any position easily.
  

⊙ Filter Drier

Specifications

⊙ Core Filter Drier

Specifications

⊙ Drier For Units Up Copper Drier

Specifications

MODEL NO.	DIMENSION (mm)										M/S SPEC.
	A0.05	B0.15	D1	E+1-2	F1	G	H0.15	N+2-1	P+2-1	R	CLASS	SIZE
SW-1	2.05	4.9	5	24	18	15.88	5	25	94	194	XH-9	8X12MESH
SW-2							10		130	230
SW-3						18.8	13.5		127	227
SW-4							20		160	260
SW-5	6.5	6.5	10			25.4	30		140	240
SW-6							40		165	265
SW-7							50		190	290

• 100% molecular sieve for new refrigerant R-12 , R-22 , R-502 , R-134a , R-407c and R-410a Tubes can be easily cut, flared or bent for job adaptation Superior mesh screens provide added filtering capacity Fully guaranteed against defects in material and workmanship.



• Receiver Drier is especially designed for CAR COOLER and it contained FILTER, Drier and so on. Receiver Drier is Combined type that is able to Adhered to these, that is Sight Glass is able to notify the lack of refrigerant, FUSIBLE PLUG, Pressure Switch and so on.


• SIGHT GLASS : This is express that lack of refrigerant and watery vapor in refrigerant
  
• FUSIBLE PLUG : This is the last Safe instrument that prevent from System Demolition.(Temp.)
  
• High Pressure Switch : This is prevent from extra-pressing and control the Vibration Fan of Compressor.
  
• Low Pressure Switch : This is notice and control the lack of refrigerant.
  
• High Low Dual Pressure Switch
  
• RECEIVER TANK : Refrigerant Storage Tank
  
• Drier : This is Reject the watery vapor in refrigerant.